How to Change a Belt on a Kirby Vacuum: A Step-by-Step Guide

how to change a belt on a kirby vacuum

Wondering how to change a belt on your Kirby vacuum? Well, you’re in the right place! In this article, I’ll walk you through the step-by-step process of replacing the belt on your trusty Kirby vacuum cleaner. Whether you’ve noticed a decrease in suction power or your brush roll isn’t spinning properly, changing the belt can often solve these common issues.

Firstly, let’s gather the necessary tools for this task. You’ll need a new replacement belt specifically designed for your Kirby model, a flathead screwdriver or coin, and some clear workspace to comfortably maneuver your vacuum. Once you have everything ready, it’s time to get started!

To begin with, make sure your Kirby vacuum is unplugged from the power source for safety purposes. Next, turn the vacuum upside down so that its base is facing up. Locate and remove the screws holding the bottom plate in place using either a flathead screwdriver or simply by twisting them off with a coin. Carefully lift off the bottom plate and set it aside.


Prepare The vacuum For Belt Replacement

Prepare the necessary tools

Before diving into replacing the belt on your Kirby vacuum, it’s important to gather all the necessary tools. Here are the items you’ll need:

  1. Screwdriver: A flathead or Phillips screwdriver, depending on your specific Kirby model.
  2. New belt: Ensure that you have a compatible replacement belt for your particular Kirby vacuum model. It’s always a good idea to check the user manual or consult with an authorized dealer to find the correct belt.
  3. Clean cloth: Having a clean cloth handy will help you wipe away any dust or debris that may accumulate during the process.

By having these tools ready, you’ll be well-prepared and save time when it comes to replacing the belt.

Access the brush roll area

To change the belt on your Kirby vacuum, you’ll need to access the brush roll area. Follow these steps:

  1. Unplug your Kirby vacuum from the electrical outlet for safety.
  2. Tilt back and lay your vacuum cleaner on its back so that you can easily access its underside.
  3. Locate and remove any screws or clips securing the bottom plate of your vacuum in place.
  4. Gently lift off or slide out the bottom plate to reveal the brush roll area.

Accessing this area will allow you to have a clear view of both ends of the brush roll, where one end connects to a motor shaft while another end accommodates new belts.

Inspect the condition of the belt

Once you’ve accessed the brush roll area, take a moment to inspect and evaluate if it’s truly time for a belt replacement:

  1. Examine whether there are signs of wear and tear such as fraying, cracking, or stretching in your current belt.
  2. Check if there is excessive debris trapped around or tangled in between either end of your brush roll.

If there are visible signs of damage or if the belt feels loose, it’s a clear indication that you need to replace it. A worn-out belt can significantly affect your vacuum’s performance and efficiency.


How to Change a Belt on a Kirby Vacuum

Installing the new belt on a Kirby vacuum is a straightforward process that can be done in just a few simple steps. In this section, I’ll guide you through the process of installing the new belt on your Kirby vacuum.

Before we begin, make sure you have the replacement belt ready. You can find compatible belts for your specific Kirby vacuum model at most home appliance stores or online retailers.

Here’s how to install the new belt:

  1. Start by unplugging your Kirby vacuum from the power source to ensure safety during the installation process.
  2. Locate the brush roll housing cover on the bottom of your Kirby vacuum. It’s usually secured with screws or clips. Use a screwdriver or release the clips to remove the cover and expose the brush roll and old belt.
  3. Take note of how the old belt is positioned around the brush roll and motor shaft before removing it. This will help you properly install the new belt later.
  4. Carefully slide off or cut away the old belt from both ends, freeing it from both ends of your vacuum cleaner.

Congratulations! You’ve successfully installed a new belt on your Kirby vacuum cleaner!

Remember to refer to your specific model’s user manual for detailed instructions and precautions. With proper maintenance and regular belt replacements, your Kirby vacuum will continue to perform at its best, keeping your home clean and fresh.

In the next section, I’ll provide some additional tips on maintaining your Kirby vacuum for optimal performance. Stay tuned!