How to Clean Shark Lift-Away Vacuum: A Step-by-Step Guide

how to clean shark lift-away vacuum

Are you tired of dealing with a dirty Shark Lift-Away vacuum? Cleaning your vacuum is an essential task to ensure optimal performance and longevity. In this article, I’ll walk you through the step-by-step process of cleaning your Shark Lift-Away vacuum, so you can keep it in pristine condition.

To begin, it’s important to disconnect the vacuum from the power source before starting any cleaning procedures. Start by emptying the dust cup or canister. Simply remove it from the main unit and dispose of its contents. Remember to check for any blockages or debris that might be hindering suction.

Next, let’s focus on cleaning the filters. The Shark Lift-Away vacuum typically has two filters – a foam filter and a HEPA filter. Start by removing these filters according to the manufacturer’s instructions. Rinse them under cold running water until they are clean and free of dirt and dust particles. Allow them to air dry completely before reinserting them into the vacuum.

Cleaning The Brush Roll

When it comes to maintaining your Shark Lift-Away vacuum, one important task is cleaning the brush roll. Over time, debris and hair can get tangled around the brush roll, affecting its performance and efficiency. By regularly cleaning this component, you can ensure that your vacuum continues to pick up dirt and debris effectively.

Here are a few steps to follow when cleaning the brush roll of your Shark Lift-Away vacuum:

  1. Power off and unplug: Before starting any maintenance tasks on your vacuum cleaner, make sure it’s powered off and unplugged from the electrical outlet. Safety should always be a top priority.
  2. Accessing the brush roll: Locate the brush roll cover on the underside of your Shark Lift-Away vacuum. Depending on the model, you may need to remove screws or simply push a latch to open the cover.
  3. Remove obstructions: Carefully inspect the brush roll for any visible debris such as hair, strings, or fibers that may have wrapped around it. Using scissors or a pair of tweezers, gently remove these obstructions without damaging the bristles or belt.

How to Clean Shark Lift-Away Vacuum

One of the common issues that can arise while using a Shark Lift-Away vacuum is blockages. These blockages can hinder the performance of the vacuum and prevent it from effectively cleaning your floors. In this section, I’ll provide some helpful tips on how to clear blockages and keep your Shark Lift-Away vacuum running smoothly.

1. Check the Brush Roll

Start by turning off and unplugging your Shark Lift-Away vacuum. Carefully examine the brush roll for any tangled hair, threads, or debris that may be causing a blockage. Use a pair of scissors or a brush to remove any obstructions from the bristles. Regularly cleaning the brush roll will not only prevent blockages but also ensure efficient suction and optimal cleaning performance.

2. Inspect the Hose

Next, detach the hose from both ends and inspect it for any clogs or obstructions. Gently run your fingers through the hose to feel for any trapped debris or foreign objects. If you notice any blockages, use a long, flexible tool like a broom handle or pipe cleaner to dislodge them. Be careful not to damage the hose in the process.

By following these simple steps, you can effectively clear blockages from your Shark Lift-Away vacuum and maintain its optimal cleaning capability. Regular maintenance and proper cleaning practices will help prolong the lifespan of your vacuum and ensure consistent performance when tackling everyday messes.