Easy and Effective Maintenance Tips: How to Clean Shark Vacuum Cordless

how to clean shark vacuum cordless


How to Clean Shark Vacuum Cordless

When it comes to keeping your shark vacuum cordless in top shape, cleaning the dust cup is an essential task. The dust cup collects all the dirt and debris sucked up by the vacuum, so regular maintenance is crucial for optimal performance. In this section, I’ll walk you through the steps of properly cleaning the dust cup.

Removing the Dust Cup

To begin, you’ll want to remove the dust cup from your shark vacuum cordless. This step allows for easier access and thorough cleaning. Here’s how you can do it:

  1. Locate the release button or latch on your vacuum cleaner.
  2. Press or slide the release button/latch to unlock and detach the dust cup.
  3. Carefully lift out the dust cup from its housing.

Remember, each model may have slight variations in design, so consult your user manual if needed.

Disassembling the Dust Cup Components

Now that you have removed the dust cup, it’s time to disassemble its components for a more detailed clean. This step ensures that every nook and cranny is free from dirt buildup. Follow these guidelines:

  1. Check for any additional parts attached to or within the dust cup assembly (such as filters or screens).
  2. If applicable, remove any removable parts according to your user manual instructions.
  3. Separate different components of the dust cup for individual cleaning.

By disassembling these components, you can effectively reach hidden areas where debris might accumulate over time.

image1 15

Cleaning the Dust Cup Filter

One vital component of your shark vacuum cordless’ dust cup is its filter(s). These filters play a crucial role in trapping fine particles and preventing them from escaping back into your home’s air during operation. Here’s how you can clean them:

  1. Remove any washable filters present in your model.
  2. Rinse them under lukewarm water until all visible dirt and debris are washed away.
  3. Gently tap the filters against a hard surface to remove any remaining dust particles.
  4. Allow the filters to air dry completely before reassembling them.

Regularly cleaning the dust cup and its components will ensure that your shark vacuum cordless maintains optimal suction power and efficiently captures dirt and debris from your floors. By following these steps, you’ll keep your vacuum cleaner in top-notch condition and enjoy a clean home with ease.

Brush Roll Maintenance

When it comes to keeping your shark vacuum cordless in top condition, proper brush roll maintenance is essential. The brush roll plays a crucial role in picking up dirt and debris from your floors, so it’s important to keep it clean and functioning optimally. In this section, I’ll walk you through the steps of how to clean the brush roll effectively.

  1. Power off and unplug the vacuum: Before starting any maintenance tasks, make sure to turn off the vacuum and unplug it from the power source. This ensures your safety while working on the brush roll.
  2. Remove the brush roll: Locate the brush roll on your shark vacuum cordless model. It is usually located underneath the cleaning head or inside a removable cover. Consult your user manual if you’re unsure about its location.
  3. Clear away tangled hair and debris: Carefully examine the bristles of the brush roll for any tangled hair, strings, or large debris that may have wrapped around it. Use a pair of scissors or a seam ripper to carefully cut away any entangled material without damaging the bristles.
  4. Clean with soap and water: Fill a basin or sink with warm water and add a few drops of mild dish soap. Submerge the brush roll in this soapy solution and let it soak for a few minutes to loosen dirt particles.
  5. Scrub gently: After soaking, use a soft-bristled brush or an old toothbrush to gently scrub along the bristles of the brush roll, removing any remaining dirt or grime. Make sure to cover all sides of the bristles thoroughly.
  6. Rinse thoroughly: Once you’ve finished scrubbing, rinse off all soap residue from the brush roll using clean running water until no more suds are visible.
  7. Dry completely: Shake off excess water from the brush roll and pat dry with a clean towel or paper towels. Leave it to air dry completely before reattaching it to the vacuum.
  8. Reinstall the brush roll: Align the brush roll properly in its designated place and secure it back into position. Make sure it spins freely without any obstructions.

Regularly cleaning your shark vacuum cordless brush roll will not only improve its performance but also prolong its lifespan. Aim to clean it at least once a month, or more frequently if you have pets or high-traffic areas that accumulate a lot of debris.