How To Clean A Shark Navigator Vacuum: Helpful Tips To Keeping Your Floors Spotless

how to clean a shark navigator vacuum

How To Clean A Shark Navigator Vacuum

Cleaning a Shark Navigator vacuum is an essential task to maintain its performance and longevity. Regular maintenance not only ensures efficient suction but also keeps the vacuum in top condition for years to come. In this article, I’ll walk you through the step-by-step process of how to clean a Shark Navigator vacuum.

Firstly, it’s important to empty the dust cup regularly. To do this, simply detach the dust cup from the main body of the vacuum and empty its contents into a trash bag or bin. Be sure to remove any large debris that may be stuck inside as well.

Next, it’s time to tackle the filters. The Shark Navigator typically has two filters – a foam filter and a felt filter. Start by removing these filters from their respective compartments and rinse them under running water until they are clean. Allow them to air dry completely before reinserting them back into the vacuum.

By following these simple cleaning steps on a regular basis, you can ensure that your Shark Navigator vacuum remains in optimal condition for effective cleaning sessions every time. Don’t neglect this routine maintenance task as it plays a crucial role in keeping your floors spotless and your vacuum performing at its best.

image1 222

Preparing the Shark Navigator Vacuum for Cleaning

When it comes to cleaning your Shark Navigator vacuum, proper preparation is key. By following a few simple steps, you can ensure that your vacuum is ready to tackle any mess effectively. Let’s dive in and explore how to prepare your Shark Navigator vacuum for cleaning.

  1. Power off and unplug: Before starting any cleaning process, make sure to turn off your Shark Navigator vacuum and unplug it from the power source. This ensures safety during the preparation and cleaning stages.
  2. Empty the dust cup: The first step in preparing your Shark Navigator vacuum is emptying the dust cup. Locate the release latch or button on the dust cup assembly and remove it from the main body of the vacuum. Dispose of any debris collected in a trash bag or bin.
  3. Check filters: To maintain optimal performance, regular filter maintenance is essential. Check both the pre-motor foam filter and post-motor felt filter for dirt buildup or damage. If dirty, rinse them under running water until clean and allow them to air dry completely before reinserting into the vacuum.
  4. Inspect brush roll: Next, inspect the brush roll located underneath the floor nozzle for tangled hair, threads, or debris. Use scissors or a seam ripper to carefully cut away any obstructions that may hinder its rotation.

By properly preparing your Shark Navigator vacuum before each cleaning session, you’ll ensure optimal performance and extend its lifespan while keeping your home spotless! Stay tuned for the next section on how to clean different parts of your Shark Navigator vacuum.

Removing and Emptying the Dust Cup

If you’re wondering how to clean a Shark Navigator vacuum, one of the important steps is removing and emptying the dust cup. This process ensures that your vacuum continues to perform at its best and maintains optimal suction power. In this section, I’ll guide you through the simple steps to effectively remove and empty the dust cup.

  1. Turn off and unplug: Before starting any maintenance on your Shark Navigator vacuum, make sure it is turned off and unplugged from the power source for safety.
  2. Locate the dust cup: The dust cup is usually located at the top or front of your Shark Navigator vacuum cleaner. Look for a latch or release button near the base of the unit.
  3. Release the latch or press the release button: Depending on your model, either slide or push down on the latch to unlock and open the dust cup compartment.
  4. Remove the dust cup: Once unlocked, carefully pull out the dust cup from its housing. Hold it over a trash bin or bag to prevent any debris from spilling onto your floors.
  5. Emptying the contents: To empty out all dirt, debris, and pet hair collected in the dust cup, simply hold it upside down above a trash bin and gently shake or tap it until all particles have been released.