If you’re experiencing pulsing with your Dyson vacuum, you’re not alone. It can be frustrating to have your vacuum lose suction and pulse intermittently while cleaning. In this article, I’ll help you understand why your Dyson vacuum is pulsing and provide some solutions to address the issue.
One possible reason for the pulsing is a clogged or dirty filter. When the filter becomes blocked with debris, it restricts airflow and can cause the vacuum to pulse. To fix this, you’ll need to clean or replace the filter. I’ll guide you through the steps later in this article.
Another potential cause of pulsing is a blockage in the hose or brush bar. If there’s an obstruction preventing proper airflow, it can lead to irregular suction and pulsation. Checking for any blockages and clearing them out should resolve the issue.
Why Is My Dyson Vacuum Pulsing
If you’re experiencing pulsing in your Dyson vacuum, you may be wondering what could be causing this frustrating issue. As an expert in the field, I’ll shed some light on some common causes of pulsing and provide solutions to help you tackle the problem.
- Clogged Filters: One possible cause of pulsating suction is clogged filters. Over time, dust and debris can accumulate in the filters, restricting airflow and causing the vacuum to pulse. To fix this, try cleaning or replacing the filters regularly as per the manufacturer’s instructions.
- Blockages in the Hose or Wand: Another culprit behind pulsing could be blockages in the hose or wand of your Dyson vacuum. When there are obstructions within these parts, it disrupts proper airflow and leads to pulsation. Check for any blockages and remove them using a long object like a broom handle or a straightened wire hanger.
- Worn Brush Bar: A worn-out brush bar can also contribute to pulsing issues. If the bristles on your vacuum’s brush bar are damaged or worn down, it may struggle to pick up dirt efficiently, resulting in irregular suction patterns. Consider replacing the brush bar if necessary.
- Power Issues: Insufficient power supply can cause your Dyson vacuum to pulse during operation. Ensure that your vacuum is properly plugged into a functioning power outlet and that there are no electrical issues affecting its performance.
- Malfunctioning Motor: In some cases, a malfunctioning motor can lead to pulsating suction. If none of the above solutions resolve the issue, it’s possible that there may be an internal problem with the motor itself. Contact Dyson customer support for further assistance or consider taking your vacuum to an authorized service center for repair.
Checking for Blockages and Clogs
When your Dyson vacuum is pulsing, one of the common causes could be a blockage or clog in the system. Don’t worry, though! In this section, I’ll guide you through the steps to check for blockages and clogs and help you find a solution.
- Power off and unplug: Before inspecting your vacuum, always make sure it’s turned off and unplugged from the power source. Safety first!
- Empty the bin: Start by emptying the dustbin to ensure there are no obstructions hindering suction. Remove any debris or clumps of dirt that may have accumulated inside.
- Check the wand and hose: Detach the wand or hose from your Dyson vacuum and visually inspect them for any signs of blockages. Look out for hair, pet fur, paper clips, or other objects that might be obstructing airflow.
- Clear any obstructions: If you spot a blockage in either the wand or hose, gently remove it using a long object like a broomstick handle or another flexible tool. Be careful not to damage any delicate components while doing so.
- Inspect brush bar area: Next, turn your attention to the brush bar area at the base of your Dyson vacuum cleaner. Clear away any tangled hair strands, fibers, or other debris that might be preventing proper rotation.
- Remove brush bar cover: Depending on your model of Dyson vacuum cleaner, you may need to remove a cover to access and clean the brush bar fully. Consult your user manual for specific instructions on how to do this correctly.
- Clean brush bar bristles: Use scissors or a knife (with caution) to cut away any stubborn tangles from around the bristles of the brush bar carefully.
- Reassemble and test: Once all potential blockages and clogs have been cleared, reattach the wand or hose, secure the brush bar cover if necessary, and plug your Dyson vacuum back in. Turn it on and see if the pulsing issue persists.